Ir a contenido
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Andrew Barclay and SECR P Class Lokpilot DCC Decoder

SKU ACC2123
Agotado
€35,95 - €35,95
€35,95
€35,95 - €35,95
€35,95
Disponibilidad:
¡Mas en el camino!

Decodificador DCC Lokpilot Clase 31

Decodificador LokPilot DCC (sin sonido)

Programado a la medida para locomotoras clase 37 lde escala precisa, para aprovechar todas las características de la locomotora.

Características comunes:

  • El decodificador LokPilot 5 se puede utilizar en ferrocarriles analógicos de CC y CA. El decodificador cambia entre los modos de funcionamiento de forma totalmente automática "sobre la marcha". Por lo general, no es necesario configurar nada.

    Características

    Sabemos que desea que sus locomotoras sean lo más realistas posible. Por lo tanto, empaquetamos el LokPilot 5 con salidas de función. Según la versión de la interfaz, cada decodificador LokPilot 5 ofrece al menos 10 salidas de funciones amplificadas con una corriente de salida de 250 mA cada una. En las versiones con interfaz PluX22 o 21MTC, se agregan 4 salidas para controlar servos o salidas de nivel lógico. Todas las funciones de iluminación importantes están disponibles. El brillo de cada salida se puede configurar por separado. El decodificador domina el prensado y desacoplamiento automático al desacoplar para acoplamientos ROCO®, Krois® y Telex®.

    Control de motores

    El control del motor del LokPilot 5 se ha vuelto a mejorar fundamentalmente. Una frecuencia de reloj PWM ajustable de forma variable de 10 kHz a 50 kHz garantiza un funcionamiento súper silencioso, especialmente con motores de armadura de campana: el típico "zumbido" es cosa del pasado. El control de carga ahora se puede adaptar a casos difíciles con hasta 10 CV. La exclusiva función "Autotune" permite que el decodificador se calibre automáticamente al motor. Con una corriente de motor de hasta 1,5 A, el decodificador LokPilot 5 proporciona energía suficiente incluso para motores más antiguos.

    Seguridad operativa

    Se puede conectar un PowerPack al LokPilot 5 para unir secciones de rieles sucios y se incluye en todas las locomotoras Accurascale como estándar

    Protección

    Por supuesto, todas las salidas de función y la salida del motor están protegidas contra sobrecarga. Queremos que disfrute de su decodificador durante el mayor tiempo posible.


Customer Reviews

Based on 8 reviews
75%
(6)
13%
(1)
13%
(1)
0%
(0)
0%
(0)
R
Ramon B.
6 pin decoder

Fits well into a tight space. Early days running it at the moment. Hopefully all will be well.

R
Roger R.
Can’t forget to buy the engine have to wait you have some more in 🙁👨‍🦳?

Haven’t got an engine , for to test it for got to or re one , have to wait until you restock🙁👨‍🦳?

N
Nick R.
Andrew Barclay Loco

Beautiful little model. Finely detailed. Excellent footplate detail. Can’t say how it runs as I had to put it back in its box so my wife could put it under the Xmas tree

R
Roddy
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

It's a decoder, it's made by ESU, it's available at a good price, it works!
Nothing more needs to be said.

P
Paul S.
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Given 5 stars because it is a quality ESU decoder, fitted into a Barclay loco and gives excellent performance.

S
Stephen L.
ESU LokPilot 6-Pin DCC Decoder For Andrew Barclay

I am usually an enthusiastic supporter of ESU DCC decoders but am not jumping for joy with this one. My Andrew Barclay runs very nicely at all speeds on DC but is 'coggy' at crawl speeds on DCC and often stops. I have run the Loco in for over 2 hours on my DCC Concepts Rolling Road and it did improve...slightly. I also purchased 3 of these decoders and all three had same performance - the extra two are for the SECR P when they arrive. My included video was made after running-in. At medium to higher speeds the loco runs fine. The puzzle is that on the exact same piece of 'clean' track the loco is fine at all speeds, but on DC! Also mentioned in another review is that there are no instructions supplied and it is easy to install the decoder the wrong-way. Must go label up. The attached blue wire is for lights. I would like to fit a stay-alive but can't see any suitable space. Hopefully someone else will do a YouTube tutorial!

User picture User picture
S
Stephen C.
AB LOK PILOT Decoder

This decoder has obviously specifically designed for the confines of this model. It would have been made easier if there was some instruction on which way round it had to be inserted and a small amount of the heat shrink protective cover had to be trimmed, but once fitted has worked excellent on my layout.

A
Alistair P.
Quality ESU product

As expected