Fitting destination displays

Your Accurascale Mk.5 Caledonian Sleepers include a choice of two bodyside destination panels. These can be found in the small plastic bags in the packaging of the models. For fitment, we recommend a basic hobby PVA glue. To allow fitment, you'll need a small amount of PVA glue, a toothpick and a set of blunt nose tweezers.

Using the toothpick, apply several small blobs of glue on the inner lip of the coach bodyside. You do not need much; four to six blobs should be more than enough.

Whilst the glue is still wet, carefully fit the destination board. We suggest fitting one end first (whilst holding the other with tweezers) and then carefully 'hinging' the item into place. Allow to dry and repeat on the other side.