Skip to content
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Andrew Barclay and SECR P Class Lokpilot DCC Decoder

SKU ACC2123
Sold out
€35,95 - €35,95
€35,95
€35,95 - €35,95
€35,95
Infhaighteacht:
Stoc Isteach

Díchódóir Lokpilot DCC Aicme 31

Díchódóir LokPilot DCC (Gan Fuaim)

Custam ríomhchláraithe le haghaidh ocomotives cruinn Aicme 37 l, chun leas a bhaint as gnéithe uile an innill.

Gnéithe Coitianta:

  • Is féidir an díchódóir LokPilot 5 a úsáid ar iarnród analógach DC agus AC. Lascaíonn an díchódóir idir na modhanna oibriúcháin go hiomlán go huathoibríoch "ar an eitilt". De ghnáth ní gá aon rud a shocrú.

    Gnéithe

    Tá a fhios againn gur mian leat do innill a bheith chomh réadúil agus is féidir. Mar sin, rinneamar an LokPilot 5 a phacáil le haschuir feidhme. Ag brath ar leagan an chomhéadain, cuireann gach díchódóir LokPilot 5 ar a laghad 10 n-aschur feidhme aimplithe le sruth aschuir 250mA an ceann. Sna leaganacha le comhéadan PluX22 nó 21MTC, cuirtear 4 aschur leis chun servos a rialú nó aschuir leibhéal loighic. Tá na feidhmeanna soilsithe tábhachtacha go léir ar fáil. Is féidir gile gach aschuir a shocrú ar leithligh. Déanann an díchódóir máistreacht ar an mbrú agus ar an dícheangail uathoibríoch agus é ag díchúpláil do chúpláin ROCO®, Krois® agus Telex®.

    Rialú mótair

    Feabhsaíodh rialú innill an LokPilot 5 go bunúsach arís. Cinntíonn minicíocht clog PWM inathraithe ó 10kHz go 50kHz oibriú thar a bheith ciúin, go háirithe le mótair clog-armature - is rud den am atá caite é an "hum" tipiciúil. Is féidir an rialú ualaigh a oiriúnú anois do chásanna deacra le suas le 10 CV. Cuireann an fheidhm uathúil "Autotune" ar chumas an díchódóra a chalabrú go huathoibríoch chuig an mótar. Le suas le sruth mótair 1.5A, soláthraíonn an díchódóir LokPilot 5 go leor sú fiú do mhótair níos sine.

    Sábháilteacht oibriúcháin

    Is féidir A PowerPack a nascadh leis an LokPilot 5 chun codanna den iarnród salach a dhroicheadú agus tá sé san áireamh i ngach locos cruinn mar chaighdeán

    Cosaint

    Ar ndóigh, tá gach aschur feidhme agus an t-aschur mótair cosanta ar ró-ualach. Ba mhaith linn go mbainfidh tú taitneamh as do dhíchódóir chomh fada agus is féidir.


Customer Reviews

Based on 8 reviews
75%
(6)
13%
(1)
13%
(1)
0%
(0)
0%
(0)
R
Ramon B.
6 pin decoder

Fits well into a tight space. Early days running it at the moment. Hopefully all will be well.

R
Roger R.
Can’t forget to buy the engine have to wait you have some more in 🙁👨‍🦳?

Haven’t got an engine , for to test it for got to or re one , have to wait until you restock🙁👨‍🦳?

N
Nick R.
Andrew Barclay Loco

Beautiful little model. Finely detailed. Excellent footplate detail. Can’t say how it runs as I had to put it back in its box so my wife could put it under the Xmas tree

R
Roddy
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

It's a decoder, it's made by ESU, it's available at a good price, it works!
Nothing more needs to be said.

P
Paul S.
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Given 5 stars because it is a quality ESU decoder, fitted into a Barclay loco and gives excellent performance.

S
Stephen L.
ESU LokPilot 6-Pin DCC Decoder For Andrew Barclay

I am usually an enthusiastic supporter of ESU DCC decoders but am not jumping for joy with this one. My Andrew Barclay runs very nicely at all speeds on DC but is 'coggy' at crawl speeds on DCC and often stops. I have run the Loco in for over 2 hours on my DCC Concepts Rolling Road and it did improve...slightly. I also purchased 3 of these decoders and all three had same performance - the extra two are for the SECR P when they arrive. My included video was made after running-in. At medium to higher speeds the loco runs fine. The puzzle is that on the exact same piece of 'clean' track the loco is fine at all speeds, but on DC! Also mentioned in another review is that there are no instructions supplied and it is easy to install the decoder the wrong-way. Must go label up. The attached blue wire is for lights. I would like to fit a stay-alive but can't see any suitable space. Hopefully someone else will do a YouTube tutorial!

User picture User picture
S
Stephen C.
AB LOK PILOT Decoder

This decoder has obviously specifically designed for the confines of this model. It would have been made easier if there was some instruction on which way round it had to be inserted and a small amount of the heat shrink protective cover had to be trimmed, but once fitted has worked excellent on my layout.

A
Alistair P.
Quality ESU product

As expected