Skip to content
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Andrew Barclay and SECR P Class Lokpilot DCC Decoder

SKU ACC2123
Sold out
£29.12 - £29.12
£29.12
£29.12 - £29.12
£29.12
Availability:
Incoming Stock

Clas 31 Lokpilot DCC Decoder

Dì-chòdachadh LokPilot DCC (Gun fhuaim)

Custom air a phrògramadh airson ocomotives clas 37 l cruinn, gus brath a ghabhail air a h-uile feart den locomotaibh.

Feartan cumanta:

  • Faodar an decoder LokPilot 5 a chleachdadh air rathaidean-iarainn analog DC agus AC. Bidh an decoder ag atharrachadh eadar na modhan obrachaidh gu tur fèin-ghluasadach “air-the-fly”. Mar as trice chan fheum dad a shuidheachadh.

    Feartan

    Tha fios againn gu bheil thu airson gum bi na locomotaibhean agad cho fìrinneach 'sa ghabhas. Mar sin, pacaich sinn an LokPilot 5 le toraidhean gnìomh. A rèir an dreach eadar-aghaidh, tha gach decoder LokPilot 5 a’ tabhann co-dhiù 10 toraidhean gnìomh leudaichte le sruth toraidh 250mA gach fear. Anns na dreachan le eadar-aghaidh PluX22 no 21MTC, tha toraidhean 4 air an cur ris gus smachd a chumail air servos no toraidhean ìre loidsig. Tha a h-uile gnìomh solais cudromach ri fhaighinn. Faodar soilleireachd gach toraidh a shuidheachadh air leth. Bidh an decoder a’ maighstireachd a’ bhrùthadh is an dealachadh fèin-ghluasadach nuair a bhios e a’ dì-cheangal airson càraidean ROCO®, Krois® agus Telex®.

    Smachd motair

    Tha smachd einnsean an LokPilot 5 air a leasachadh gu bunaiteach a-rithist. Bidh tricead gleoc PWM a ghabhas atharrachadh bho 10kHz gu 50kHz a’ dèanamh cinnteach à obrachadh air leth sàmhach, gu sònraichte le motaran clag-armature - tha an “hum” àbhaisteach mar rud san àm a dh’ fhalbh. Faodar an smachd luchdan a-nis atharrachadh gu cùisean duilich le suas ri 10 CVan. Tha an gnìomh sònraichte "Autotune" a’ toirt comas don decoder a bhith air a chalabadh gu fèin-ghluasadach chun motair. Le suas ri 1.5A sruth motair, tha an decoder LokPilot 5 a’ toirt seachad sùgh gu leòr eadhon airson motaran nas sine.

    Sàbhailteachd obrachaidh

    Faodar

    A PowerPack a cheangal ris an LokPilot 5 gus earrannan rèile salach a dhùnadh agus tha e air a ghabhail a-steach anns a h-uile locos cruinn mar ìre àbhaisteach

    Dìon

    Gu dearbh, tha a h-uile toradh gnìomh agus toradh motair air an dìon bho cus luchd. Tha sinn airson 's gun còrd an dì-chòdachadh agad cho fada 's as urrainn dhut.


Customer Reviews

Based on 8 reviews
75%
(6)
13%
(1)
13%
(1)
0%
(0)
0%
(0)
R
Ramon B.
6 pin decoder

Fits well into a tight space. Early days running it at the moment. Hopefully all will be well.

R
Roger R.
Can’t forget to buy the engine have to wait you have some more in 🙁👨‍🦳?

Haven’t got an engine , for to test it for got to or re one , have to wait until you restock🙁👨‍🦳?

N
Nick R.
Andrew Barclay Loco

Beautiful little model. Finely detailed. Excellent footplate detail. Can’t say how it runs as I had to put it back in its box so my wife could put it under the Xmas tree

R
Roddy
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

It's a decoder, it's made by ESU, it's available at a good price, it works!
Nothing more needs to be said.

P
Paul S.
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Given 5 stars because it is a quality ESU decoder, fitted into a Barclay loco and gives excellent performance.

S
Stephen L.
ESU LokPilot 6-Pin DCC Decoder For Andrew Barclay

I am usually an enthusiastic supporter of ESU DCC decoders but am not jumping for joy with this one. My Andrew Barclay runs very nicely at all speeds on DC but is 'coggy' at crawl speeds on DCC and often stops. I have run the Loco in for over 2 hours on my DCC Concepts Rolling Road and it did improve...slightly. I also purchased 3 of these decoders and all three had same performance - the extra two are for the SECR P when they arrive. My included video was made after running-in. At medium to higher speeds the loco runs fine. The puzzle is that on the exact same piece of 'clean' track the loco is fine at all speeds, but on DC! Also mentioned in another review is that there are no instructions supplied and it is easy to install the decoder the wrong-way. Must go label up. The attached blue wire is for lights. I would like to fit a stay-alive but can't see any suitable space. Hopefully someone else will do a YouTube tutorial!

User picture User picture
S
Stephen C.
AB LOK PILOT Decoder

This decoder has obviously specifically designed for the confines of this model. It would have been made easier if there was some instruction on which way round it had to be inserted and a small amount of the heat shrink protective cover had to be trimmed, but once fitted has worked excellent on my layout.

A
Alistair P.
Quality ESU product

As expected